Installing carpet stair tread for two story homes

Special carpet stair treads are available at any hardware store. They are usually a strong type of particle board, only rounded on the front side called a bull nose.

When you put the actual tread and riser plates on, you can use either hardwood or tread material specially made for stairs. For carpeted stairs the
way you plan
will be the same using stringers, treads and risers to build the stairway. Carpeted stairways offer a few more conveniences that exposed stairs don’t have. You don’t have to make them look good because they are going to be covered up.

Carpeted stairs are kind of going out of style. People are turning more to the natural look and feel of hardwood. I personally, like carpeted stairs no matter what.

If the wood will be exposed, a quality hardwood is best because of the durability. If the stairs will be carpeted, you can buy tread material with the rounded nosing and it will hold up just fine.


It’s easier to put the riser plate on first, then the tread plate will lay flush against the riser plate without any gaps. The plates need to be screwed into place.

In this case, nails just won’t do the job. Also, if the treads protrude any more than 1 ½ inch beyond the riser, it becomes a tripping hazard.

There is also a material that you can put on to the striger before screwing or nailing the tread in place. This material prevents squeaky stairs after a few years of use. It’s really cheap and very much worth the money.

The best way to prevent squeaky stairs is to get a good, secure fit so the boards can’t move around.

stairsstair plans


back to the top

Next, examples of stairs

Back to stair construction main page

Over 4 million visitors to this site since it was born!

My newsletter keeps you up to date on home construction and design ideas.

home construction

I just wanted to say that I love your website. My husband and I followed your instructions on building our own home. Most of the work we did ourselves, but not all. We saved $90,000 in labor costs and now have a beautiful home that we own.

--Sue and Les Carrigan, Draper, Utah

I built my own home doing all my own labor. My house costs me around $70,000 for materials. It took me 8 months to build and is about 2,000 square feet. I didn't think I could do it, but your house web site encouraged me. I used all the info you had.

Thank you,

Benny Luis Lopez,

Gainsville, Florida

I can't thank you enough for your free information web site about home building. I was looking for Electrical wiring diagrams when I found your site. It was very helpful.

Steve Lundquist,

Little Rock, Arkansas

My wife and I lost our home to foreclosure but we kept a plot of land to start over. We are halfway through the construction of our house. Your website gave us hope to start over and build a house with low payments. We are in our late 60's but we find it rewarding to put so much effort into a project that will reward us for years to come.

Name respectfully withheld